MedIdle Wiki Play MedIdle

Timber With a Memory

Millhaven RebuiltNoviceAbout 5–8 minutes of play

Prepare a measured timber repair and learn why a sound beam must be fitted with its grain, not against it.

Starts at
Building Site
Place in the story
One of two approaches (either one opens the next quest)
To start
A Line in the Mud finished, Construction 3 and Woodcutting 5
To finish
Construction 5
Suggested levels
Construction 5, Woodcutting 5

Walkthrough

A part only moves on when you press Continue or Turn in, and the quest pays out when you press Claim. Work done before a part begins never counts towards it.

Part 1: Select the repair stock

At the Forest, Elin’s note asks for straight, uncracked timber. Read the three marked stocks, then gather a small fresh batch.

  • Puzzle at Forest: Which stock should carry the joint?

    Stock A has a deep split running through its joint. Stock B is straight-grained and uncracked. Stock C is soft where it lay in standing water. Choose the stock for the load-bearing repair.

    Choose one:

    • Stock A: split through the joint
    • Stock B: straight-grained and uncracked
    • Stock C: soft at its base
    Show the hints
    1. The joint needs continuous, sound fibres.
    2. Stock B is the only stock described as both straight and uncracked.
    Show the solution
    Stock B: straight-grained and uncracked
  • Cut 6 normal logs after this stage begins. (Cut Normal Logs, Woodcutting 1, at Forest; only what you do after this part begins counts)

Part 2: Measure once, cut the batch

Saw six logs at the Building Site. The batch produces twelve planks: eight for the repair, with the remainder yours to keep.

  • Complete Saw Planks 6 times, producing 12 planks through normal actions. (Saw Planks, Construction 1, at Building Site; only what you do after this part begins counts)

Part 3: Fit the timber repair

Prepare the timber repair plan using Elin’s note: support the old beam before lifting it; align the new timber before driving pegs; remove the support last. When the plan is ready, turn in 8 planks at the Building Site.

Before this part can go on: Construction 5.

  • Hand over 8 planks for the timber repair. (8 × Plank, handed in at Building Site; the items are taken)
  • Puzzle at Building Site: Fit the supported joint

    Select the four steps in a safe order. The temporary support must carry the old beam until the aligned replacement is pinned.

    Put these in the right order:

    • Set the temporary support
    • Align the replacement timber
    • Drive the joint pegs
    • Remove the temporary support
    Show the hints
    1. Do not release a supported load before its new joint is secured.
    2. Support → align → peg → remove support.
    Show the solution
    1. Set the temporary support
    2. Align the replacement timber
    3. Drive the joint pegs
    4. Remove the temporary support

Rewards

Show how the quest ends

The timber method is recorded. It is enough to begin Raising Day, and the masonry method remains available whenever you want to strengthen the case.