MedIdle Wiki Play MedIdle

Watchfires Without Chains

The Ashes CovenantExperiencedAbout 6–11 minutes of play

Rebuild the physical logic of the old warning line: support, ventilation and a way to end the signal.

Starts at
Building Site
Place in the story
One of two approaches (either one opens the next quest)
To start
Cinders on the Wind finished, Construction 35 and Firemaking 60
To finish
Construction 35 and Firemaking 60
Suggested levels
Construction 35, Firemaking 60

Walkthrough

A part only moves on when you press Continue or Turn in, and the quest pays out when you press Claim. Work done before a part begins never counts towards it.

Part 1: Make two sound supports

At the Building Site, forge two steel beams after this stage begins. The native action requires Construction 35 and two steel bars per beam.

  • Forge Steel Beam twice at the Building Site. (Forge Steel Beam, Construction 35, at Building Site; only what you do after this part begins counts)

Part 2: Practice a controlled warning fire

At Camp, light yew logs six times after this stage begins. Use the ordinary Firemaking action; its ashes remain in your bank and are not a quest offering.

  • Light Yew Logs six times at Camp. (Light Yew Logs, Firemaking 60, at Camp; only what you do after this part begins counts)

Part 3: Fit the demonstration frame

At Demon Plain, arrange the frame’s safety steps, then turn in two steel beams for Seren’s demonstration frame. This is a warning installation, not a new house project.

  • Deliver two steel beams from the bank for the warning frame. (2 × Steel Beam, handed in at Demon Plain; the items are taken)
  • Puzzle at Demon Plain: A warning that can end

    The frame instructions are explicit: brace the base before placing the fire tray; leave a clear vent before lighting; test the release shutter only after the fire is visible. Arrange the four actions. The test is a quest interaction, not an extra Firemaking recipe.

    Put these in the right order:

    • Light the warning in its tray
    • Brace the base
    • Test the release shutter
    • Leave the vent clear and set the tray
    Show the hints
    1. The structure must stand before anything is lit; the release can be tested only against a visible signal.
    2. Brace → clear vent and set tray → light → test release.
    Show the solution
    1. Brace the base
    2. Leave the vent clear and set the tray
    3. Light the warning in its tray
    4. Test the release shutter

Rewards

Show how the quest ends

The watchfire method proves that a useful warning needs support and a release. Seren can align the three seals from this evidence. The rune investigation remains available.